建体彩网|中彩网双色球连号|
?
快捷搜索:  as  test  1111  test aNd 8=8  test++aNd+8=8  as++aNd+8=8  as aNd 8=8

新蒲京澳門賭場網站:SAP MM 測試題

?

Inventory Management

Question 1

In the

purchase order on which the goods receipt is based, you defined a purchase order price unit that differs from the purchase

order unit.

What is the significance of the purchase order price unit and what should you take note of in the case of

a goods receipt?

1. The purchase order price unit is stored in the material master record or purchasing info record

and defines the unit of measure in which the material is ordered.

2. The system establishes the relationship between

Inventory Management the purchase order price unit and the purchase order unit by unit conversion in the purchase order.

3. At the time of

goods receipt, both the quantity in the purchase order unit and the quantity in the purchase order price unit have to be

entered, however, the quantity in purchase order price unit is calculated by the system. You have to change it, when the

calculated quantity differs from reality.

4. Both at the time of goods receipt and invoice verification, the material

is valuated on the basis of the purchase order unit.

Question 2

You enter a goods issue and receive the

following message: "W: On , only 0.000 pieces are available".What do you conclude from this?

1. No

stocks of the material exist anywhere in the entire plant. Therefore, nothing can be withdrawn.

2. Only the specified

storage location does not contain any stocks of the material. Therefore, nothing can be withdrawn.

3. The material

exists in the specified storage location on the current day, however, it is unavai新蒲京澳門賭場網站lable, because of other reservations.

4. The message represents a warning which you can ignore by pressing the ENTER key.

Question 3

At which

level is physical inventory carried out in Inventory Management ?

1. At material level

2. At material/stock

type level

3. At material/plant/stock type level

4. At material/plant/storage location/stock type

level

Question 4

What options do you have after entering a physical inventory count for a raw material?

1. You can initiate a recount.

2. You can print a list of differences to determine the materials you have to

recount.

3. You can post an inventory difference, whereby a material document and an accounting document are created

in the background.

4. You can post the inventory difference, whereby only an accounting document is created in the

background.

Question 5

How do you replicate a delivery free of charge in R/3’s Materials Management?

1. You enter a purchase order with the purchase order price. Then, however, you post the receipt with reference to

the purchase order using a non-valuated movement type.

2. You enter a purchase order item, set its invoice indicator

to blank and its purchase order price to zero, and then post the goods receipt.

3. You do not enter a purchase order,

but post the delivery free of charge using a specific movement type in Inventory Management.

4. You create the

material with the material type UNBW and then post the goods receipt without reference to the purchase

order.

Question 6

When does the system automatically create a storage location view in the material master

record?

1. At the first goods receipt into special stocks the system creates a special stock - storage location view

with the number 9999.

2. Automatic creation of storage locations (views) must be permitted for the plant.

3. In

customizing, you can define for movement types whether at goods movement the system creates a storage location view

automatically.

4. If the first goods receipt of a material is posted to a cost center and you have set the automatic

creation of storage location views for the plant and movement type, the system creates the storage location view

automatically.

Question 7

Which of the following statements about movement types are true?

1. The

movement type influences the update of material stock account and consumption ac新蒲京澳門賭場網站count.

2. In the standard SAP system,

you can enter per material document only goods movements of one movement type.

3. Goods movements, that are created

from other application areas (for example a delivery in SD), are not described with movement types.

4. The movement

type used controls field selection for the goods movement transaction.

5. If you use special stock indicators you can

create different stock and value updates of a material for one and the same movement type.

Valuation

Question1

Which of the following statements on procuring a material of material type NLAG are correct?

1. The purchase

order must be account assigned.

2. The goods receipt must always be non-valuated.

3. When you enter an invoice,

you can change the account assignment as long as the goods receipt was non-valuated.

4. When the material is for

consumption, no document is ever created in Financial Accounting.

Question 2

Which of the following stock

transfers/transfer postings are relevant to valuation?

1. Stock transfer from storage location to storage location

within the same plant or company code.

2. Stock transfer from consignment stores of vendor XY to our unrestricted-use

stock in storage location 0001.

3. Transfer posting from stock in quality inspection in storage location 001 to stock

in quality inspection in storage location 0002 within the same plant.

4. Stock transfer of a material from storage

location 0001 from plant 0001 to plant 0002. The plants belong to the same company, however the valuation areas are different

(valuation level is plant).

Question 3

Which of the following statements about valuation classes are true?

1. The valuation class is maintained in the material master record at the storage location level. With that, a split

valuation per storage location is possible.

2. The valuation class is maintained in the material master record at

valuation area level. With that, different account determination is possible for the materials of one material type. For

example, you can have different material stock accounts for different materials of the same material type.

3. The

valuation class is a standard class of the classification system. A characteristic of this class refers to the moving average

price or standard price in the accounting view in the material master record. With that, i新蒲京澳門賭場網站t is possible to search for

materials with similar prices. The search is possible with direct values, intervals and greater than / less than

relationships.

4. The valuation classes will be tied to one or more material types via an account category

reference.

Question 4

Which of the following statements on price control in the SAP R/3 system are correct?

1. Price control “S� allows only purchase orders with constant prices. Therefore, for purchased materials with

price control â€&oelig新蒲京澳門賭場網站;Sâ€?, you should arrange outline agreements to protect the constant price.

2. Price control “V�

is recommended for purchased materials.

3. If a goods issue is posted between when you post the goods receipt and when

you post the invoice, and this leads to the total stock being smaller that the quantity to be settled, the system posts any

differences between the purchase order price and the invoice for the quantity consumed (stock shortage) to a price difference

account, irrespective of the price control that the material is subject to.

4. The importance of price control “V�

depends on whether the material ledger is active or not. If you are not working with the material ledger, price control

“V� means that you are using the moving average price. This means that the value of the stock account and the price per

price unit is adjusted for existing stocks.

5. In the case of differences between the purchase order price and the

valuation price in the material master, the difference is posted to a GR/IR clearing account at goods receipt if you are

working with price control “S�. This is then cleared when the invoice is posted.

Material Requirements

Planning

Question 1

Which prerequisites must be fulfilled before a new MRP list can be created for amaterial?

1. The material was included in the planning run.

2. The creation indicator allows the creation of

MRP lists.

3. The material has been assigned an MRP group.

4. The material has been assigned an MRP profile.

5. The planning run is carried out in the background.

Question 2

Which data must you have maintained in the system so that schedule lines are automatically created as a result of the planning run for forecast-based planning?

1. MRP procedure VV is defined in the material master record; past consumption values exist; a scheduling agreement

exists; a source list with the scheduling agreement as the supply source is defined as relevant to planning; a forecast

exists; a planning run is executed with an appropriate setting for the automatic creation of schedule lines.

2. MRP

procedure VV is defined in the material master record; a scheduling agreement exists; a quota arrangement exists and is

defined as relevant to planning; a forecast exists; a planning run is executed with an appropriate setting for the automatic

creation of schedule lines.

3. MRP procedure VV is defined in the material master record; a scheduling agreement

exits; a source list with the scheduling agreement as the supply source is defined as relevant to planning; a forecast

exists; a planning run is executed with an appropriate setting for the automatic creation of schedule lines.

4. MRP

procedure VV is define in the material master record; past consumption values exist; a scheduling agreement exists; a quota

arrangement relevant to planning exists; a forecast exists; a planning run is executed with an appropriate setting for the automatic creation of schedule lines.

Question 3

Which MRP procedures are used in consumption-based planning?

1. Forecast-based Planning

2. Material requirements Planning

3. Manual reorder point Planning

4. Systematic materials Planning

5. Time-phased materials Planning

Purchasing

Question 1

How can a purchasing info record be generated?

1. Manual entry

2. Update from purchase order

3.Update from purchase requisition

4. Update from RFQ

Question 2

Purchase orders can be outputted

(printed or transmitted) in different languages. Where does the system obtain the information determining the language in

which a PO is to be printed?

1. Customizing setting

2. The language must be specified when you log on to the

system. This is then used as the basis for system printing.

3. You specify the language to be generally used for communication purposes for each vendor in the vendor master record.

4. The language from the PO header is used.

5. The language is defined via the material short text.

Question 3

How is the outputting

(printing/transmission) of purchase orders controlled?

1. As a rule, the system attempts to determine a message

record for each message type in the message schema by means of an access sequence.

2. A message record in the PO

header contains all the information that is necessary for outputting, such as the printer and the transmission time-spot.

3. Printing only takes place if the print indicator has been set in the PO item.

4. Printing only takes place if

at least one message record can be found.

Question 4

What is an access sequence?

1. The access

sequence is used within the context of the "condition technique" to find condition records.

2. An access sequence can

comprise several condition tables.

3. An access sequence defines which condition records are allowed and the sequence

in which they are selected.

4. An access sequence is assigned to the condition types that are to be determined

automatically.

5. Within an access sequence you can define, that after the first successful access at a condition

record the system is not searching another records.

Question 5

How does the system determine the conditions

when creating a purchase order?

1. The system uses an access sequence stored in Customizing to determine the

appropriate info record.

2. If the info record concerned was created manually, you can copy the conditions directly

from the info record to the purchase order.

3. If the info record concerned was created automatically, there is only a

reference to the previous purchase order, from which the system then determines the conditions.

4. You can enter the

conditions manually. However, you cannot use scale prices.

Question 6

Which statements regarding the release

(approval) of purchase requisitions with classification are correct?

1. The assignment of the release strategy is

effected automatically via the values assigned to the class characteristics.

2. The release status describes which

follow-on actions are possible in connection with the purchase requisition (for example, release for issue of RFQs, release

for issue of RFQs and PO).

3. The purpose of the release strategy is to exercise control over the transmission of the

purchase requisition.

Question 7

In which way can you obtain information on purchase orders issued to a vendor

that have not yet been invoiced?

1. You make use of a list that displays all the purchase orders issued to a certain

vendor. You limit the POs shown on the list to those that have not yet been invoiced by the appropriate definition of the

Scope of List.

2. You make use of a list that displays all the purchase orders issued to a certain vendor. You limit

the POs shown on the list to those that have not yet been invoiced by means of the selection parameters.

3. The

selection parameters and list scopes are predefined by SAP and cannot be changed.

Question 8

How does the

system assign prices to items when creating a purchase order? To what extent can you use these prices in subsequent purchase

orders?

1. You can enter conditions manually. However, you cannot use scale prices.

2. The conditions for the

purchase order items are saved as conditions in the info record. The system then proposes these prices in subsequentpurchase

orders.

3. Info records that the system created automatically from the purchase order only contain the reference to

the previous purchase order, from which the system deter新蒲京澳門賭場網站mines the conditions.

4. If there is no info record, and if

the purchase order item is created with reference to a purchase requisition item that has a material master record, the

system assumes the price from the purchase requisition.

Question 9

What does the purchasing document type

control?

1. Number assignment

2. Permitted item categories

3. The eligibility of scaled prices in

contracts

4. The eligibility of scaled prices in scheduling agreements

5. Which header texts, appendix texts,

and item texts are printed

Question 10:

You wish to procure a material using a purchase order. You wish to

take delivery of the material at different times. A graduated discount scale exists for the material. How do you proceed if

you wish to take advantage of the discount arrangement?

A Enter several order items with the same material number and

different delivery dates

B Enter one order item with the material number and assign the material to different

accounts

C Enter an order item with the material number and create a number of schedule lines

D Enter a number

of purchase orders for the material and specify different delivery dates

Invoice Verification

Question 1

Which options for handling cash discounts are available in R/3?

1. Gross or net posting at the time of goods

receipt

2. Gross or net posting at the time of invoice receipt

3. Gross or net posting at the time of purchase

order entry

4. Deduction of cash discount during the payment run in Financial Accounting

5. Gross or net

posting when the invoice is released

Question 2

Which of the following statements on purchasing transactions

using foreign currencies are correct?

1. An exchange rate can be entered in the order header. This is only for

statistical purposes to be able to analyze fluctuations.

2. At goods receipt the system uses the current exchange

rate.

3. You can configure the system so that it uses the current exchange rate in Invoice Verification.

4. You

can configure the system so that it uses the exchange rate from the purchase order in Invoice Verification.

5. You can

configure the system so that it uses the exchange rate from the order header in Invoice Verification.

Question 3

What must you take into account if you want to post an invoice before the goods receipt? What are the consequences of

using this procedure?

1. You must set the GR-based invoice verification indicator in the purchase order at the

latest.

2. Before you enter the invoice, you must set the GR-based invoice verification indicator in the vendor master

record.

3. The system cannot refer to the quantity to be settled and the corresponding amount. You must enter this

information manually every time.

4. The system identifies a quantity variance and blocks the invoice for payment

(provided that the appropriate tolerance limits are exceeded).

Master Data

Question 1

Which of the

following statements about the material number are true?

1. You can extend the length of the material number to a

maximum of 40 characters. You configure this in Customizing.

2. When you create a material, the system checks if the

material number falls within a number range defined in Customizing, depending on the material type.

3. The system

checks the existence of the material number in all transactions that work with material master records.

4. When you

create a new material master record without specifying a material number, the system always generates a material number

automatically.

5. You can use a template to format the material number, which you configure in Customizing. It applies

to all material master records in an R/3 System.

Question 2

What controls the account group in the vendor

master?

1. Account determination

2. Field selection in the vendor master

3. Type of number assignment

for vendor master

4. Particular use of vendor master record

Question 3:

Which of the following

statements on procuring a material of the material type NLAG are correct?

A. The purchase order must be acount

assigned.

B. The goods receipt must always be unvaluated.

C. when you enter an invoice, you can change the

account assignement as long as the goods receipt was unvaluated.

D. When the material is for consumption, no document

is ever created in Financial Acccounting.

免責聲明:以上內容源自網絡,版權歸原作者所有,如有侵犯您的原創版權請告知,我們將盡快刪除相關內容。

您可能還會對下面的文章感興趣:

建体彩网
喜乐彩软件 手机体球比分即时 网上说陈思教你赚钱是真的假的 7星彩七星彩专家预测 福建22选5 腾讯欢乐麻将下载5周年 山西11选5开奖5结果 江苏时时彩视频直播 发视频去微博怎么赚钱 福彩辽宁35选7走势图